 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PME285 * EMI suppressor, class X2, metallized paper * 0.001 - 0.1 F, 275 VAC, +110 C * The highest possible safety regarding active and passive flammability. * Self-extinguishing encapsulation. The material is recognized according to UL 94 V-0. * Very precise positioning of leads in relation to the case giving efficient utilisation of PC board space. * Excellent self-healing properties. Ensures long life even when subjected to frequent overvoltages. * High dU/dt capability. * Good resistance to ionisation due to impregnated dielectric. * The capacitors meet the most stringent IEC humidity class, 56 days. * The impregnated paper ensures excellent stability giving outstanding reliability properties, especially in applications having continuous operation. L TYPICAL APPLICATIONS CONSTRUCTION Multi-layer metallized paper. Encapsulated The capacitors are intended for use as interference suppressors in X2, across-the- and impregnated in self-extinguishing material meeting the requirements of UL 94V-0. line, antenna-coupling and line-by-pass. B H p 0.3 TECHNICAL DATA Rated voltage Capacitance range Capacitance tolerance Temperature range Climatic category IEC Approvals Dissipation factor tan Insulation resistance 275 VAC 50/60 Hz 0.001 - 0.1 F 20% -40 to +110C 40/110/56/B S, N, D, FI, VDE, SEV, IMQ, UL, CSA d d = 0.6 for p = 10.2 0.8 for p = 15.2 and 20.3 1.0 for p = 25.4 l = standard : 30 +5/-0 mm option : short leads, tolerance +0/-1 mm (standard 6 mm, code R06) Other lead lengths on request 1.3 % at 1 kHz 12000 M Measured at 500 VDC after 60 s, +23C Tabulated self-resonance frequencies f0 refer to 5 mm lead lengths. Recommended voltage: 630 VDC The 100% screening factory test is carried out at 2150 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. Resonance frequency In DC applications Test voltage between terminals ENVIRONMENTAL TEST DATA Vibration IEC 60068-2-6, Test Fc 3 directions at 2 hour each 10 - 500 Hz at 0.75 mm or 98 m/s2 4000 bumps at 390 m/s2 No visible damage No open or short circuit No visible damage No open or short circuit Wetting time < 1 s Bump IEC 60068-2-29, Test Eb Solderability Active flammability Passive flammability IEC 60068-2-20, Test Ta EN 132400 IEC 60384-14(1993) EN 132400 IEC 60068-2-3, Test Ca Solder globule method Humidity +40C and 90 - 95% R.H. 170 l 56 days PME285 ARTICLE TABLE Quantity per package reel R30 R06 taped pcs pcs pcs 800 800 800 800 800 800 500 500 500 500 400 400 250 1600 1600 1600 1600 1600 1600 1000 1000 1000 1000 800 600 400 700 700 700 700 700 700 600 600 600 600 400 400 400 Approvals Weight f O g MHz 0.9 0.9 0.9 0.9 0.9 1.1 1.5 1.6 1.6 1.9 2.3 2.9 3.6 55 45 38 32 27 22 15 12 10 8.4 6.5 4.7 4.5 Max dU/dt V/s 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 600 S N D FI VDE SEV IMQ UL CSA Capaci- Max dimensions tance in mm F B H L 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 4.5 9.5 4.5 9.5 4.5 9.5 4.5 9.5 4.5 9.5 4.5 10.5 5.5 5.5 5.5 5.5 7.5 7.5 8.5 10.5 11.5 11.5 13.0 12.5 15.0 17.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 Article code p 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 PME285MA4100MR30 PME285MA4150MR30 PME285MA4220MR30 PME285MA4330MR30 PME285MA4470MR30 PME285MA4680MR30 PME285MB5100MR30 PME285MB5150MR30 PME285MB5220MR30 PME285MB5330MR30 PME285MB5470MR30 PME285MB5680MR30 PME285MB6100MR30 APPROVALS/REFERENCE DOCUMENTS Certification Body S N D Fl VDE SEV IMQ UL CSA Specification EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 UL 1283 (UR=250 VAC) UL 1414 (UR=250 VAC) C 22.2 No. 1 Approval reference 9913230/01 P99100775 DK99-01442 207513 121167 99.7 70302.01 V 4756 E 100117 E 73869 53108 * * * * * * * MARKING RIFA RIFA article code Rated capacitance Rated voltage X2 SH, for self healing Climatic category according to IEC 60068-1, appendix A * Passive flammability class * Approval marks * Manufacturing code (year, month) ORDERING INFORMATION The article code for the standard part is given in the article table. For other options, see page 21. PACKING Capacitors in standard design (lead length 30 mm) and with lead length 5 or 6 mm are packed bulk in a box with dimensions 245 x 145 x 80 mm. Quantity/package as per article table. Reels with taped capacitors are packed 10 in a box with dimension 370 x 370 x 560 mm. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. 171 |
Price & Availability of PME285MA4330MR30
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |